Mercedes-Benz S-Class Cabriolet 2017, Руководство пользователя

Страница: 36 / 525

Restraint system functionality
When the ignition is switched on, a self-test is
performed, during which the 6 restraint sys‐
tem warning lamp lights up. It goes out no later
than a few seconds after the vehicle is started.
The components of the restraint system are then
functional.
Malfunctioning restraint system
A malfunction has occurred in the restraint sys‐
tem if:
R
The 6 restraint system warning lamp
does not light up when the ignition is
switched on.
R
The 6 restraint system warning lamp
lights up continuously or repeatedly during a
journey.
&
WARNING Risk of injury or fatal injury
due to a malfunction in the restraint sys‐
tem
If the restraint system is malfunctioning,
restraint system components may be trig‐
gered unintentionally or might not be trig‐
gered at all in the event of an accident. This
may affect the seat belt tensioner or airbag,
for example.
#
Have the restraint system checked and
repaired immediately at a qualified spe‐
cialist workshop.
Function of the restraint system in an acci‐
dent
How the restraint system works is determined by
the severity of the impact detected and the type
of accident anticipated:
R
Frontal impact
R
Rear impact
R
Side impact
R
Rollover
The activation thresholds for the components of
the restraint system are determined based on
the evaluation of the sensor values measured at
various points in the vehicle. This process is pre-
emptive in nature. The triggering/deployment of
the components of the restraint system must
take place in good time at the start of the colli‐
sion.
Factors which can only be seen and measured
after a collision has occurred cannot play a deci‐
sive role in airbag deployment, nor do they pro‐
vide an indication of airbag deployment.
The vehicle may be deformed significantly with‐
out an airbag being deployed. This is the case if
only parts which are relatively easily deformed
are affected and the rate of vehicle deceleration
is not high. Conversely, an airbag may be
deployed even though the vehicle suffers only
minor deformation. If very rigid vehicle parts
such as longitudinal members are hit, for exam‐
ple, this may result in sufficiently high levels of
vehicle deceleration.
Occupant safety 33