Flat tyre
315
1
TIREFIT sealant filler bottle
2
Flap
3
Recess
4
On/off switch
5
Electric connector with cable
6
Air pump hose
7
Flange
X
Open flap
2
on the electric air pump.
X
Pull connector
5
and air pump hose
6
from the housing.
X
Screw air pump hose
6
onto flange
7
of
TIREFIT filler bottle
1
.
X
Place TIREFIT sealant filler bottle
1
head
downwards into recess
3
of the electric
air pump.
8
Filler hose
9
Valve
X
Remove the cap from valve
9
on the faulty
tyre.
a
Pressure release screw
b
Pressure gauge
X
Make sure pressure release screw
a
on
pressure gauge
b
is fully closed.
X
Screw filler hose
8
onto valve
9
.
X
Insert connector
5
into the socket in the
luggage compartment (
Y
page 207) or the
second row of seats (
Y
page 207).
!
The socket/cigarette lighter* in the front
centre console is not designed for operat-
ing the electric air pump.
X
Press on/off switch
4
on the electric air
pump to I.
The electric air pump is switched on. The
tyre is inflated.
i
First, TIREFIT is pumped into the tyre. The
pressure can briefly rise to around 5 bar.
Do not switch off the electric pump dur-
ing this phase.
X
Let the electric pump run for five minutes.
The tyre should then have a pressure of at
least 1.8 bar.
!
Do not operate the electric air pump for
longer than six minutes without a break.
Otherwise, it may overheat.
The air pump can be operated again once
it has cooled down.
Practical advice
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 315
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight