Loading and stowing
200
tion suddenly or are involved in an accident,
and could cause you an injury.
You can use the safety net in two different
positions:
1
Bracket behind the B-pillar
2
Bracket behind the C-pillar
R
The brackets behind B-pillar
1
are
required for the full luggage compartment
enlargement (
Y
page 191).
The corresponding lashing eyelets
to tighten the net are located in the footwell
of the 2nd row of seats (
Y
page 188).
R
The brackets behind C-pillar
2
are
required for the partial luggage compart-
ment enlargement (
Y
page 190).
The corresponding lashing eyelets to ten-
sion the net are located in the luggage
compartment (
Y
page 188).
Preparing the safety net
X
Open the two Velcro fasteners on the
safety net holder.
X
Unroll and unfold the safety net.
The upper and lower guide rods must
engage audibly.
Attaching the safety net
Guide rod inserted behind B-pillar
1
Retainer
2
Guide rod
X
Insert guide rod
2
into retainer
1
in the
direction of the arrow.
X
Slide guide rod
2
forwards into retainer
1
in the direction of the arrow.
Tightening the safety net
Seat belt reel holder behind the front seats
1
Belt hook
2
Lashing eyelet
3
Strap
X
Insert belt hook
1
into lashing eyelet
2
in the direction of the arrow.
X
Pull tensioning strap
3
by the loose end in
the direction of the arrow until the safety
net is tight.
X
After a short distance, check the tension of
the safety net and retighten it if necessary.
Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 200
Dateiname: 6515_1825_02_buchblock.pdf;
preflight