
Air conditioning
169
Setting the temperature in the front
compartment using 2-zone Thermatic
X
Turn the key to position 2 in the ignition
lock.
X
To increase/reduce: turn thumbwheels
1
and
7
clockwise or anti-clockwise
(
Y
page 161). Only change the temperature
setting in small increments. Start at 22 †.
Setting the temperature in the front
compartment using multi-zone
Thermotronic*
X
Turn the key to position 2 in the ignition
lock.
X
To increase/reduce: turn thumbwheels
1
and
9
clockwise or anti-clockwise
(
Y
page 163). Only change the temperature
setting in small increments. Start at 22 †.
Setting the temperature in the rear
compartment using multi-zone
Thermotronic*
X
Turn the key to position 2 in the ignition
lock.
X
Press the
™
button.
The multi-zone Thermotronic* display
switches to the settings for the rear-com-
partment air conditioning.
X
To increase/reduce: turn thumbwheel
9
clockwise or anti-clockwise
(
Y
page 163). Only change the temperature
setting in small increments. Start at 22 †.
The set temperature is shown in the multi-
zone Thermotronic* display. The multi-
zone Thermotronic* display changes back
to the standard display about three sec-
onds after a button is pressed.
Setting the temperature in the rear
compartment using the rear-compart-
ment air conditioning*
X
Turn the key to position 2 in the ignition
lock.
X
To increase/reduce: turn thumbwheel
2
clockwise or anti-clockwise
(
Y
page 166). Only change the temperature
setting in small increments. Start at 22 †.
Adjusting the air vents
G
Risk of injury
Very hot or very cold air can flow from the
air vents. This could cause burns or frost-
bite to bare skin in the immediate vicinity
of the vents. Keep bare skin away from
these air outlets. If necessary, direct the
airflow away to a different area of the vehi-
cle interior.
Please observe the following notes to ensure
that the air can flow freely through the air
vents:
R
keep the air inlet between the windscreen
and the bonnet free of deposits, such as ice
and snow, to guarantee the supply of fresh
air into the vehicle interior.
R
never cover the vents or air inlet and outlet
grilles in the vehicle interior.
i
Position the sliders for the centre air
vents in the central position to provide vir-
tually draught-free ventilation.
Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 169
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight