
Loading and stowing
196
1
Centre console
2
Recess
3
Anchoring points
4
Supporting base
5
Release handle
6
Direction of removal
X
Pull release handle
5
.
The front part of centre console
1
detaches from supporting base
4
.
X
Lift centre console
1
upwards in the direc-
tion of arrow
6
and hold centre console
1
in this position.
X
At the same time, reach into recess
2
.
X
Lift centre console
1
by recess
2
upwards in the direction of the arrow to
release centre console
1
from anchoring
points
3
.
X
Remove centre console
1
from the vehi-
cle.
i
Supporting base
4
cannot be removed.
Fitting the centre console
G
Risk of injury
The centre console must be correctly anch-
ored on the supporting base. The centre
console could otherwise become detached
from the supporting base and you and oth-
ers could be injured by the centre console
being thrown around if you:
R
brake sharply
R
change direction suddenly
R
are involved in an accident
You can fit the centre console in two different
positions. In the front position (position 1) on
vehicles with the long wheelbase, you can
enlarge the luggage compartment fully
(
Y
page 190) without having to remove the
centre console.
i
The stowage compartment and cup
holder will only be illuminated if the centre
console is fitted in the rear position (posi-
tion 0).
1
Securing ring (position 1)
2
Securing ring (position 0)
3
Supporting base
4
Anchoring point (position 1)
5
Anchoring point (position 0)
Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 196
Dateiname: 6515_1825_02_buchblock.pdf;
preflight