X
To interrupt convenience closing: release
the
&
button.
Using KEYLESS-GO
X
Touch recessed sensor surface
:
on the
door handle until the side windows and the
sliding sunroof or the panorama sliding sun-
roof are fully closed.
i
Make sure you only touch recessed sensor
surface
:
.
X
Make sure that all the side windows and the
sliding sunroof or panorama sliding sunroof
are closed.
X
Vehicles with a panorama sliding sunroof:
touch recessed sensor surface
:
on the door
handle again until the roller sunblinds of the
panorama sliding sunroof close.
X
To interrupt convenience closing:release
recessed sensor surface
:
on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y
page 94).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch on
the door control panel until the side window is
completely closed (
Y
page 94).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing function is then not active. Parts of the
body could be trapped in the closing area in the process. This poses an increased risk of injury or
even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process, release
the switch or push the switch again to reopen the side window.
96
Side windows
Ope
ni
ng
and
cl
os
in
g