G
WARNING
The reversing function does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 4 mm of the closing movement
R
during resetting
R
when closing the side window again man-
ually immediately after automatic reversing
This means that the reversing function cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If someone
becomes trapped, press the switch to open
the side window again.
Opening and closing the side win-
dows
The switches for all side windows are located on
the driver's door. There is also a switch on each
door for the corresponding side window.
The switches on the driver's door take prece-
dence.
:
Front left
;
Front right
=
Rear right
?
Rear left
X
Turn the key to position 1 or 2 in the ignition
lock.
X
To open manually: press and hold the cor-
responding button.
X
To open fully: press the button beyond the
point of resistance and release it.
Automatic operation is started.
X
To close manually: pull the corresponding
button and hold it.
X
To close fully: pull the button beyond the
point of resistance and release it.
Automatic operation is started.
X
To interrupt automatic operation: press/
pull the corresponding switch again.
If you press/pull the switch beyond the point of
resistance and release, automatic operation is
started in the corresponding direction. You can
stop automatic operation by pressing/pulling
again.
You can continue to operate the side windows
after switching off the engine or removing the
key. This function remains active for five
minutes or until the driver's or front-passenger
door is opened.
The side windows cannot be operated from the
rear when the override feature for the side win-
dows is activated (
Y
page 68).
Opening and closing the hinged side
windows
The hinged side windows are operated electri-
cally from the driver's seat.
X
Turn the key to position 1 or 2 in the ignition
lock.
X
To open fully: press switch
:
and release it.
X
To close fully: pull switch
:
and release it.
X
To stop the closing procedure: press
switch
:
again.
If the hinged side windows become blocked dur-
ing closing, the closing procedure is stopped.
The hinged side windows then open again fully.
94
Side windows
Openi
ng
and
closing