Problems with the steering wheel heating
Problem
Possible causes/consequences and
M
M
Solutions
The steering wheel heat-
ing has switched itself
off prematurely or can-
not be switched on.
The on-board voltage is too low because too many electrical consum-
ers are switched on.
X
Switch off electrical consumers that you do not need, such as the
rear window heating or interior lighting.
EASY-ENTRY/EXIT feature
Important safety notes
G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. There is a risk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
Move the steering wheel adjustment lever if
there is a risk of entrapment by the steering
wheel. The adjustment process is stopped.
Press one of the memory function position but-
tons. This function is only available on vehicles
with a memory function.
G
WARNING
If children activate the EASY-ENTRY/EXIT fea-
ture, they can become trapped, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
G
WARNING
If you drive off while the EASY-ENTRY/EXIT
feature is making adjustments, you could lose
control of the vehicle. There is a risk of an
accident.
Always wait until the adjustment process is
complete before driving off.
The EASY-ENTRY/EXIT feature makes getting in
and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature in the on-board computer
(
Y
page 254).
Position of the steering wheel when the
EASY-ENTRY/EXIT feature is active
The steering wheel tilts upwards if you:
R
remove the key from the ignition lock
R
open the driver's door and KEYLESS-GO is in
position 1
R
open the driver's door and the key is in posi-
tion 0 or 1 in the ignition lock
i
The steering wheel only moves upwards if it
has not already reached the upper stop.
Position of the steering wheel for driv-
ing
The steering wheel is moved to the previously
set position if:
R
the driver's door is closed and
R
you insert the key into the ignition lock
or
R
you press the Start/Stop button once on vehi-
cles with KEYLESS-GO
If you close the driver's door with the key inser-
ted in the ignition lock, the steering wheel is
automatically moved to the previously set posi-
tion.
The last position of the steering column is stored
when you:
R
switch the ignition off
R
save the setting with the memory function
(
Y
page 118).
Steering wheel
115
Seats,
steering
wheel
and
mirrors
Z