Protect bulbs from moisture during operation.
Do not allow bulbs to come into contact with
liquids.
Replace only the bulbs listed (
Y
page 121).
Have the bulbs that you cannot change yourself
replaced at a qualified specialist workshop.
If you require assistance replacing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult a
qualified specialist workshop.
Headlamps and lights are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times. Have
the headlamp setting verified regularly.
Vehicles with LED headlamps: the front and
rear lamp clusters of your vehicle are equipped
with LED bulbs. Do not replace the bulbs your-
self. Contact a qualified specialist workshop
with the necessary specialist knowledge and
tools to carry out the work required.
Overview of bulb types
You can replace the following bulbs. The details
for the bulb types can be found in the legend.
Vehicles with halogen headlamps
:
Turn signal lamp: PY 21 W
;
Main-beam headlamp/daytime driving
lamp/side lamp/parking lamp: H15 55 W/
15 W
=
Dipped-beam headlamp: H15 55 W
Tail lamps (vehicles with halogen headlamps)
:
Reversing lamp: W 16 W
;
Turn signal lamp: PY 21 W
=
Brake lamp: W 16 W
?
Rear foglamp: H 21 W
Replacing front bulbs
Fitting/removing the cover on the front
wheel arch
You must remove the cover in the front wheel
arch before you can change the front turn signal
lamp.
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Slide cover
:
up and remove it.
X
To fit: insert cover
:
again and slide it down
until it engages.
Replacing bulbs
121
Lights
and
windscreen
wipers
Z
