X
Select symbol
?
using the controller.
The "Coupling up a trailer" function is selec-
ted. The distance specifications now apply
only to objects that are at the same level as
the ball coupling.
X
Reverse carefully, making sure that trailer
drawbar locating aid
;
points approximately
in the direction of trailer drawbar
=
.
X
Reverse carefully until trailer drawbar
=
rea-
ches the red guide line.
The distance between the trailer drawbar and
the red guide line is now approximately
0.30 m.
X
Couple up the trailer (
Y
page 213).
Wide-angle function
:
Symbol for the wide-angle view function
;
Own vehicle
=
Parking Assist PARKTRONIC warning dis-
plays
Select this view when you are driving out of an
exit and the view of crossing traffic is restricted,
for example.
360° camera
General notes
The 360° camera is a camera system compris-
ing four cameras.
The system evaluates images from the following
cameras:
R
Reversing camera
R
Front camera
R
Two cameras in the exterior mirrors
The cameras cover the immediate surroundings
of the vehicle. The system assists you, for
instance when parking or at exits with reduced
visibility.
You can show pictures from the 360° camera in
full-screen mode or in seven different split-
screen views on the COMAND display. A split-
screen view also includes a top view of the vehi-
cle. This view is calculated from the data sup-
plied by the installed cameras (virtual camera).
You can show pictures from the 360° camera in
full-screen mode or in six different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle. This
view is calculated from the data supplied by the
installed cameras (virtual camera).
The seven split-screen views are:
The six split-screen views are:
R
top view and image from the reversing cam-
era (130° viewing angle)
R
top view and image from the front camera
(without displaying the maximum steering
wheel angle)
R
top view and enlarged rear view
R
top view and enlarged front view
R
top view and trailer view (vehicles with trailer
tow hitch)
R
top view and rear-view images from the exte-
rior mirror cameras (rear wheel view)
R
top view and forward-view images from the
exterior mirror cameras (front wheel view)
i
The top view and trailer view are available
for vehicles equipped with a trailer tow hitch.
When the function is active and you shift the
transmission from position
7
or
C
to
A
, you see the previous view in the COMAND
display. The dynamic guide lines are hidden.
When you shift between transmission positions
7
and
C
, you see the previously selected
front or rear view.
Important safety notes
The 360° camera is only an aid. It is not a sub-
stitute for your attention to the immediate sur-
roundings. The responsibility for safe manoeu-
vring and parking remains with you. Make sure
that there are no persons, animals or objects in
the manoeuvring area while manoeuvring and
parking in parking spaces.
The 360° camera may show a distorted view of
obstacles, show them incorrectly or not at all. It
cannot show objects in the following areas:
204
Driving systems
Dr
ivi
ng
an
d
parki
ng
