Mercedes-Benz G-Class 2018, Руководство пользователя

Страница: 415 / 549

The teach-in process takes longer if you have
engaged the differential locks. Check the tyre
pressure again at a later date.
#
Compare the tyre pressure with the recom‐
mended tyre pressure for the current operat‐
ing condition (
/
page 410). Observe the
notes on tyre temperature (
/
page 409).
% The values displayed in the multifunction dis‐
play may deviate from those of the tyre pres‐
sure gauge as they refer to sea level. At high
altitudes, the tyre pressure values indicated
by a pressure gauge are higher than those
shown by the on-board computer. In this
case, do not reduce the tyre pressure.
Make sure to observe the following further rela‐
ted subject:
R
Notes on tyre pressure (
/
page 409)
Restarting the tyre pressure monitoring sys‐
tem
Requirements:
R
The recommended tyre pressure is correctly
set for the respective operating status on
each of the four wheels (
/
page 409).
Restart the tyre pressure monitoring system in
the following situations:
R
The tyre pressure has changed.
R
The wheels or tyres have been changed or
newly fitted.
On-board computer:
4
Service
5
Tyres
#
Swipe downwards on Touch Control on the
left-hand side of the steering wheel.
The Use current tyre pressures as new refer-
ence values? message is shown in the multi‐
function display.
#
To begin restart, press Touch Control on the
left-hand side of the steering wheel.
The Tyre press. monitor restarted message is
shown in the multifunction display.
Current warning messages are deleted and
the yellow h warning lamp goes out.
After you have been driving for a few
minutes, the system checks whether the cur‐
rent tyre pressures are within the specified
range. The current tyre pressures are then
accepted as reference values and monitored.
Make sure to observe the following further rela‐
ted subject:
R
Notes on tyre pressure (
/
page 409)
412 Wheels and tyres