Mercedes-Benz EQS, Руководство оператора

Страница: 414 / 565

*
NNOOTE TE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
#
Only use the towing eye or trailer hitch to
tow away or tow start the vehicle.
#
Do not use the towing eye or trailer hitch
to tow the vehicle during recovery.
TTooww-st -star arting t ting the v he vehicle ehicle
#
If the drive system does not start, have the
vehicle transported to a quali ed specialist
workshop, e.g. a Mercedes-Benz Service
Centre.
#
The drive system cannot be started by tow-
starting the vehicle. Do not perform any
attempts to tow-start the vehicle.
Electr Electrical fuses ical fuses
NNoottes on electr es on electrical fuses ical fuses
&
W WARNING ARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a re.
#
Always replace faulty fuses with speci-
ed new fuses containing the correct
amperage.
*
NNOOTE TE Damage due to incorrect fuses
Electrical components or systems may be
damaged by incorrect fuses, or their function-
ality may be signi cantly impaired.
#
Only use fuses that have been approved
by Mercedes-Benz and which have the
correct fuse rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the col-
our and the label. The fuse ratings and further
information to be observed can be found in the
fuse assignment diagram.
FFuse assignment diagr
use assignment diagram: am: on the fuse box in the
rear passenger compartment (
/
page 412).
*
NO NOTE TE Damage or malfunctions caused by
moisture
Moisture may cause damage to the electrical
system or cause it to malfunction.
#
When the fuse box is open, make sure
that no moisture can enter the fuse box.
#
When closing the fuse box, make sure
that the seal of the lid is positioned cor-
rectly on the fuse box.
If the newly inserted fuse also blows, have the
cause traced and recti ed at a quali ed specialist
workshop.
Ensure the following before replacing a fuse:
R
The vehicle is secured against rolling away.
R
All electrical consumers are switched o .
R
the vehicle is switched o .
Breakdown assistance 411 411