Mercedes-Benz EQS, Руководство оператора

Страница: 209 / 565

j
Park position
k
Reverse gear
i
Neutral
h
Drive position
Eng Engaging rev aging rever erse g se gear R ear R
#
Depress the brake pedal and push the DIRECT
SELECT lever upwards past the rst point of
resistance.
Eng Engaging neutr aging neutral N al N
#
Depress the brake pedal and push the DIRECT
SELECT lever up or down to the rst point of
resistance.
Subsequently releasing the brake pedal will allow
you to move the vehicle freely, e.g. to push it or
tow it away.
If y
If you w ou want t ant the tr he transmission t ansmission to r o remain in neutr emain in neutral al
N ev N even if t en if the v he vehicle is switc ehicle is switched hed o : o :
#
Start the vehicle.
#
Depress the brake pedal and engage neutral
i
.
#
Release the brake pedal.
#
Switch o the vehicle.
%
If you then exit the vehicle leaving the key in
the vehicle, the transmission remains in neu-
tral
i
.
Eng Engaging par aging park position P k position P
#
Observe the notes on parking the vehicle
(
/
page 225).
#
Depress the brake pedal until the vehicle
comes to a standstill.
#
When the vehicle is stationary, press button
j
.
Park position is only engaged when the trans-
mission position display
j
is shown in the
driver's display. If no transmission position dis-
play
j
appears, secure the vehicle to prevent
it from rolling away.
Park position
j
is engaged automatically if one
of the following conditions is met:
R
You switch the vehicle o in transmission posi-
tion
h
or
k
.
R
You open the driver's door when the vehicle is
at a standstill or when driving at a very low
speed and the transmission is in position
h
or
k
.
%
To manoeuvre with an open driver's door,
open the driver's door while stationary and
engage transmission position
h
or
k
again.
%
If you have engaged park position
j
or
switched o the vehicle and no transmission
position display is displayed, secure the vehi-
cle from rolling away (
/
page 230).
206 206 Driving and parking