Mercedes-Benz EQS, Руководство оператора

Страница: 356 / 565

Se Setting t tting the c he charg harge lev e level of t el of the high v he high volt oltag age batt e battery ery
when t when the c he char harging st ging station and des ation and destination are tination are
rreac eached hed
#
Select
Z
in the navigation module
(
/
page 348).
#
Select
Route
.
#
Select Charge level at destination or Charge
level at charging stations .
#
Move the control knob to the le or right and
set the preferred charge level in percent (%).
The destination or charging station along the
route is reached with the set charge level.
To reach a charging station, the system uses the
battery capacity, e.g. up to 10% residual energy
content (charge level). You can increase this
charge level on arrival at the charging station and
destination, e.g. to 25% at the charging station
and 50% at the destination.
%
In the event of increased energy consumption
while driving, e.g. with headwind, the following
options are available on the system side:
R
The charging station is safely reached
even at charge levels of less than 10%.
R
Navigation with Electric Intelligence
selects a closer charging station for the
route.
%
If a charging facility is available at the destina-
tion, the charge level can be lowered below
10%. The Min. message appears on the cen-
tral display. Make sure that the range monitor
is switched on.
#
TTo select a c o select a char harging st ging station pro ation provider vider:: switch
Mercedes me Charge on or o .
If the option is activated, only charging sta-
tions payable with Mercedes me Charge are
taken into account when selecting the charg-
ing station.
or
#
Activate All .
All charging stations known to the navigation
system are taken into account when calculat-
ing routes with Electric Intelligence, regardless
of the type of payment.
It may be necessary to register with the pro-
vider.
Switc Switching t hing the r he rang ange monit e monitor on or or on or oo
The activated range monitoring assists with mes-
sages on the driver and central display to ensure
safe arrival at the destination.
#
Select
Z
in the navigation module
(
/
page 348).
#
Select Route .
#
Activate or deactivate
Range monitoring
.
To reach the destination with the charge level
set by the driver, the range is permanently
monitored when the option is switched on.
%
This function is not available in all countries.
MBUX multimedia system 353 353