Mercedes-Benz EQB 2022, Руководство оператора

Страница: 66 / 450

Secur Securing t ing the c he child r hild res estrtraint syst aint system wit em with t h the seat he seat
belt on t belt on the fr he front passeng ont passenger seat er seat
When installing a belt-secured child restraint sys-
tem on the front passenger seat, always observe
the following:
O
Observe the notes on rearward-facing and
forward-facing child restraint systems on the
front passenger seat (
/
page 63).
O Observe the child restraint system manufac-
turer's installation and operating instructions.
O
When using a forward-facing child restraint
system in weight category I: remove the head
restraint from the respective seat, if possible.
A er the child restraint system has been
removed, replace the head restraint immedi-
ately and adjust all head restraints correctly.
O
The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the front
passenger seat.
O If the head restraint of the child seat cannot
be fully extended when it is installed in the
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight category II or III.
Contact with the roof when the head
restraint is fully extended and locked in place
will not result in any restrictions on use.
O
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the wrong
direction.
O
The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
O
Never place objects (e.g. cushions) under or
behind the child restraint system.
The seat belt on the front passenger side is equip-
ped with a special seatbelt retractor.
When enabled, the special seatbelt retractor
ensures that the seat belt does not slacken once
the child seat is secured (
/
page 58).
&
W WARNING ARNING Risk of injury or death due to
objects between the seat surface and the
child restraint system
Objects between the seat surface and the
child restraint system could a ect the function
of the automatic front passenger airbag shut-
o .
#
Do not place any objects between the
seat surface and the child restraint sys-
tem.
#
Always make sure that the child restraint
system is correctly installed.
#
Set the front passenger seat as far back as
possible and move the seat into the highest
position if possible.
#
Adjust the seat cushion inclination so that the
front edge of the seat cushion is in the highest
position and the rear edge of the seat cushion
is in the lowest position.
#
Set the seat backrest to the most vertical
position possible.
64 64 Occupant safety