Mercedes-Benz EQB 2022, Руководство оператора

Страница: 339 / 450

The tool bag contains:
R
Jack
R
Gloves
R
Lug wrench
R
Alignment bolt
R
Folding chock
R
Ratchet for jack
Pr Prepar eparing t ing the v he vehicle f ehicle for a wheel c or a wheel change hange
RReq equir uirements: ements:
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
R
The required tire-change tool kit is available.
% If your vehicle is not equipped with the tire-
change tool kit, consult a quali ed specialist
workshop to nd out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shi the transmission to position j .
#
Switch o the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
RRaising t aising the v he vehicle when c ehicle when changing a wheel hanging a wheel
RReq equir uirements: ements:
R
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
change (
/
page 337).
Important notes on using the jack:
R
Use only a vehicle-speci c jack that has been
approved by Mercedes-Benz to raise the vehi-
cle.
R
The jack is only designed for raising and hold-
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
R
The jack must be placed on a rm, at and
non-slip surface. If necessary, use a large, at,
load-bearing, non-slip underlay.
R
The foot of the jack must be positioned verti-
cally under the jack support point.
Rules of conduct when the vehicle is raised:
R
Never place your hands or feet under the vehi-
cle.
R
Never lie under the vehicle.
R
Do not open or close any doors or the tailgate.
Wheels and tires 337 337