Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 369 / 541

#
Pull plug 7 with the cable and filler hose 3
out of the tyre inflation compressor housing.
#
Insert tyre sealant bottle 9 in socket 6 of
the tyre inflation compressor in such a way
that the red arrow on tyre sealant bottle 9
matches the red arrow on the tyre inflation
compressor.
#
Turn tyre sealant bottle
9
a quarter turn
clockwise.
#
Insert the plug of filler hose 3 in socket 5
of tyre sealant bottle 9 .
#
Turn filler hose 3 a quarter turn clockwise.
#
Remove the valve cap from valve A on the
faulty tyre.
#
Screw union nut 4 of filler hose 3 onto
valve A .
#
Insert plug 7 into a 12‑V‑socket in your vehi-
cle.
#
Turn the key to position
1
in the ignition lock.
#
Press on and off switch
8
on the tyre infla-
tion compressor.
The tyre inflation compressor is switched on.
The tyre is inflated. First, tyre sealant is pum-
ped into the tyre. The pressure may briefly rise
to approximately 500 kPa (5 bar/73 psi).
Do not switch off the tyre inflation compressor
during this phase!
#
Let the tyre inflation compressor run for a
maximum of ten minutes.
The tyre should then have attained a tyre pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tyre sealant leaks out, make sure you clean the
affected area as quickly as possible. It is prefera-
ble to use clean water.
If you get tyre sealant on your clothing, have it
cleaned as soon as possible with perchloroethy-
lene.
If, after ten minutes, a tyre pressure of 200 kPa
(2.0 bar/29 psi) has not been attained:
#
Switch off the tyre inflation compressor.
366 Breakdown assistance