Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 152 / 541

Adaptive Highbeam Assist Plus automatically
switches between the following types of light:
R
Low beam
R
Partial high beam
R
High beam
Partial high beam uses the high beam to shine
past other road users rather than dazzling them.
The vehicle in front will be illuminated by the low
beam.
At speeds greater than 30 km/h:
R
If no other road users are detected, high beam
will switch on automatically.
R
If other road users are detected, partial high
beam will switch on automatically.
At speeds below 25 km/h or when there is suffi-
cient street lighting:
R
The high beam will switch off automatically.
R
The partial high beam will switch off automati-
cally.
%
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switching Adaptive Highbeam Assist Plus on/off
Switching on
#
Turn the light switch to the
Ã
position.
#
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dark, the
_
indicator lamp will
light up on the central display section of the
instrument display.
Switching off
#
Switch off the high beam using the combina-
tion switch.
Setting the exterior lighting switch-off delay time
Requirements:
R
The light switch is in the
Ã
position.
Multimedia system:
4
©
5
Settings
5
Lights
5
Ext. light. del. sw. off
#
Set the switch-off delay time.
When the vehicle's engine is switched off, the
exterior lighting will be activated for the set
time.
Light and sight 149