Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 415 / 541

Engine oil filling capacity (plug-in hybrid)
Model Capacity
B 250 e 5.1 litres
The specified filling capacity refers to an oil
change with the oil filter.
Notes on brake fluid
Observe the notes on operating fluids
(
/
page 404).
&
WARNING Risk of an accident due to
vapour pockets forming in the brake sys-
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapour pockets may form in the brake system
when the brakes are applied hard.
This impairs the braking effect.
#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly replaced at a quali-
fied specialist workshop.
Only use a brake fluid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant
Notes on coolant
Observe the notes on operating fluids
(
/
page 404).
&
WARNING Risk of fire‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
#
Allow the engine to cool down before
you top up the antifreeze.
#
Make sure that no antifreeze spills out
next to the filler opening.
#
Thoroughly clean the antifreeze from
component parts before starting the
vehicle.
* NOTE Damage caused by incorrect cool-
ant
#
Only use coolant that has been premixed
with the required antifreeze protection.
Information on coolant is available at the fol-
lowing locations:
R
In the Mercedes-Benz Specification for
Operating Fluids 320.1
-
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo App
R
At a qualified specialist workshop
* NOTE Overheating at high outside temper-
atures
If an inappropriate coolant is used, the cooling
system is not sufficiently protected against
overheating and corrosion at high outside
temperatures.
#
Only use coolant approved for
Mercedes-Benz.
412 Technical data