Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 375 / 541

R
Automatic transmission: the transmission is in
position
j
.
R
Manual transmission: the transmission is in
neutral.
R
The vehicle and all electrical consumers are
switched off.
R
The bonnet is open.
#
Slide cover
1
of positive clamp
2
on the
jump-starting connection point in the direction
of the arrow.
#
Connect positive clamp 2 on your vehicle to
the positive pole of the donor battery using
the jump lead/charging cable. Always begin
with positive clamp 2 on your own vehicle
first.
#
During starting assistance: start the engine of
the donor vehicle and run at idle speed.
#
Connect the negative pole of the donor bat-
tery and earth point 3 of your own vehicle by
using the jump lead/charging cable. Begin
with the donor battery first.
#
During starting assistance: start the engine of
your own vehicle.
#
During the charging process: start the charg-
ing process.
#
During starting assistance: let the engines run
for several minutes.
#
During starting assistance: before disconnect-
ing the jump lead, switch on an electrical con-
sumer on your own vehicle, e.g. the rear win-
dow heater or lighting.
When the starting assistance/charging process is
complete:
#
First, remove the jump lead/charging cable
from earth point 3 and the negative pole of
the donor battery, then from positive clamp
2 and the positive pole of the donor battery.
Begin each time with the contacts on your
own vehicle first.
#
After removing the jump lead/charging cable,
close cover 1 of positive clamp 2 .
Plug-in hybrid: if your vehicle has been started
with starting assistance, it may not be possible to
use the electric drive for approximately 30
minutes.
Further information can be obtained at a qualified
specialist workshop.
Replacing the 12 V battery
#
Observe the notes on the 12 V battery
(
/
page 369).
372 Breakdown assistance