Mercedes-Benz CLA, Руководство пользователя

Страница: 382 / 525

FFitting a ne itting a new wheel w wheel
RReq equir uirements: ements:
R
The wheel to be changed is removed and the
centring pin is screwed in (
/
page 378).
*
NO NOTE TE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognise
dangers.
&
W WARNING ARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut threads or wheel hub/wheel mounting
bolt threads can cause the wheel bolts/wheel
nuts to come loose.
As a result, you could lose a wheel while driv-
ing.
#
Never oil or grease the threads.
#
In the event of damage to the threads,
contact a quali ed specialist workshop
immediately.
#
Have the damaged wheel bolts or dam-
aged hub threads replaced.
#
Do not continue driving.
#
Observe the information on the choice of tyres
(
/
page 370).
For tyres with a speci ed direction of rotation, an
arrow on the side wall of the tyre indicates the
correct direction of rotation. Observe the direc-
tion of rotation when tting.
#
Slide the wheel to be mounted onto the cen-
tring pin and push it on.
&
W WARNING ARNING Risk of injury from tightening
wheel bolts and nuts
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip.
#
Only tighten wheel bolts or wheel nuts
when the vehicle is on the ground.
#
Be sure to observe the instructions and safety
notes on "Changing a wheel" (
/
page 370).
#
For safety reasons, only use wheel bolts which
have been approved by Mercedes-Benz and
for the wheel in question.
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated until they are
nger-tight.
#
Unscrew and remove the centring pin.
#
Tighten the last wheel bolt until it is nger-
tight.
#
Lower the vehicle (
/
page 379).
Low Lower ering t ing the v he vehicle ehicle a er a er a wheel c a wheel change hange
RReq equir uirements: ements:
R
The new wheel has been tted (
/
page 379).
#
TTo low o lower t er the v he vehicle: ehicle: place the ratchet onto
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
Wheels and tyres 379 379