Mercedes-Benz CLA, Руководство пользователя

Страница: 202 / 525

Combo 2 vehicle socket
#
Press the centre rear section of socket ap
1 and swing the socket ap forwards and
open.
The % indicator lamp 2 and status dis-
play 3 light up white.
%
When the vehicle is switched on (the õ
display is lit in the Instrument Display), socket
ap 1 cannot be opened.
#
Press catch 7 to the le and fold open
socket cover 5 .
%
Vehicles with a vehicle socket combo require
only connection 8 for the charging cable
connector. Open only the upper part of socket
cover 5 .
#
To charge at a mains socket, insert the mains
plug into the mains socket of the external
power source to the stop and set the maxi-
mum charging current if required
(
/
page 193).
#
Insert the charging cable connector into vehi-
cle socket connection 8 to the stop. If the
wallbox/charging station is not equipped with
a charging cable, insert the plug of the vehi-
cle's charging cable into the wallbox/charging
station socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp 4 and status dis-
play 3 ash orange and, as soon as the high-
voltage battery is charged, green.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion either refers to the predicted charge level at
the set departure time, or the time at which the
high-voltage battery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Driving and parking 199 199