Mercedes-Benz CLA, Руководство пользователя

Страница: 398 / 525

Engine oil Engine oil speci cation speci cation (plug-in h (plug-in hybr ybrid) id)
Model Model MB-Fr MB-Freig eigabe or MB- abe or MB-
Approv Approval al
CLA 250 e 229.51, 229.52,
229.61, 229.71*,
229.72
* recommended for the lowest possible fuel con-
sumption
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil speci ca-
tions marked in the table for the lowest SAE vis-
cosity class. Observe any possible restrictions of
the approved SAE viscosity classes.
%
If the engine oils listed in the table are not
available, you may add a maximum of 1.0 litre
of engine oils with MB-Freigabe or MB-
Approval 229.31 or ACEA C3 once only.
Engine oil capacity (plug-in h Engine oil capacity (plug-in hybr ybrid) id)
Model Model Capacity Capacity
CLA 250 e 4.5 litres
The speci ed lling capacity refers to an oil
change with the oil lter.
NNoottes on br es on brak akee uid uid
Note the instructions about operating uids
(
/
page 387).
&
W WARNING ARNING Risk of an accident due to
vapour pockets forming in the brake sys-
tem
The brake uid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake uid. If the boiling point is too low,
vapour pockets may form in the brake system
when the brakes are applied hard.
This impairs the braking e ect.
#
Have the brake uid renewed at the
speci ed intervals.
Have the brake uid regularly replaced at a quali-
ed specialist workshop.
Only use a brake uid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant Coolant
NNoottes on coolant es on coolant
Observe the notes on operating uids
(
/
page 387).
&
W WARNING ARNING Risk of re‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
#
Allow the engine to cool down before
you top up the antifreeze.
#
Make sure that no antifreeze spills out
next to the ller opening.
#
Thoroughly clean the antifreeze from
component parts before starting the
vehicle.
* NNOOTE TE Damage caused by incorrect cool-
ant
#
Only use coolant that has been premixed
with the required antifreeze protection.
Technical data 395 395