Do not use a bulb that has been dropped or that
has scratches on its glass tube.
The bulb could explode if:
R
you touch it
R
it is hot
R
you drop it
R
you scratch or score it.
Only operate bulbs in closed lamps which have
been designed for this purpose. Only fit spare
bulbs of the same type and the specified volt-
age.
Marks on the glass tube shorten the operating
life of a bulb. Do not hold the glass bulb with your
bare hands. If necessary, clean the glass bulb
with alcohol or spirit while it is cold and wipe
with a lint-free cloth.
Protect the bulbs against moisture when in use.
Do not allow the bulbs to come in contact with
liquids.
Replace only the bulbs listed (
Have bulbs that you cannot replace yourself
replaced at a qualified specialist workshop.
If you require assistance changing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult a
qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times. Have
the headlamp setting checked regularly.
Replacing bulbs – Overview of bulb
The following lamps with their bulb types can be
replaced:
Front bulbs
:
Side turn signals: WY 5W
;
Turn signals: PY 21 W
=
Dipped-beam/main-beam headlamps:
H4 60/55 W
?
Side lamps: P 21 5W
Rear bulbs
:
Third brake lamp: W 16W
;
Tail/brake lamp: P 21/5W
=
Reversing lamp: P 21 W
?
Turn signals: PY 21 W
A
Licence plate lamp: W 5W
Interior lighting:
R
Front interior light, left: W 5W
R
Front interior light, right: W 5W
R
Reading lamp: W 6W
R
Load compartment light: W 5W or W 6W
(depending on vehicle)
R
Illumination of side sliding door: W 6W
(depending on vehicle)
Replacing bulbs
81
Lights and windscreen wipers
Z
Содержание Citan 2015
Страница 1: ...Citan Operating Instructions ...
Страница 212: ...210 ...
Страница 213: ...211 ...
Страница 214: ...212 ...