Fastening and adjusting the seat belts
Observe the safety notes on the seat belt
page 30) and the information on the correct
use of the seat belt (
Basic illustration
X
The seat backrest must be in an almost ver-
tical position.
X
Pull the seat belt smoothly from belt outlet
=
and engage belt tongue
;
into belt
buckle
:
.
X
If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.
The shoulder section of the seat belt must
always be routed across the centre of the shoul-
der. Adjust the belt outlet if necessary.
X
Press and hold belt outlet release
?
and slide
it up or down.
X
Let go of belt outlet release
?
in the desired
position and make sure that the belt outlet
engages.
!
Make sure that the seat belt is fully rolled up.
Otherwise, the seat belt or belt tongue will be
trapped in the door or in the seat mechanism.
This could damage the door, the door trim
panel and the seat belt. Damaged seat belts
can no longer fulfil their protective function
and must be replaced. Visit a qualified spe-
cialist workshop.
Basic illustration
X
Press release button
:
, hold belt tongue
;
firmly and guide it back towards belt outlet
=
.
Belt warning for driver and co-driver
The
7
seat belt warning lamp in the instru-
ment cluster is a reminder that all vehicle occu-
pants must wear their seat belts. It may light up
continuously or flash. In addition, a warning tone
may sound.
The
7
seat belt warning lamp goes out and
the warning tone ceases when the driver and the
front passenger have fastened their seat belt.
32
Occupant safety
Safety
Содержание Citan 2015
Страница 1: ...Citan Operating Instructions ...
Страница 212: ...210 ...
Страница 213: ...211 ...
Страница 214: ...212 ...