Mercedes-Benz B-Class F-CELL, Руководство оператора

Страница: 345 / 368

R
Always use a clean lint-free cloth when
handling bulbs.
R
Your hands should be dry and free of oil and
grease.
R
If the newly installed bulb does not come
on, contact an authorized F-CELL Service
Center.
i Mercedes-Benz recommends using
Longlife (LL) bulbs.
i Replacing the bulbs for the front lamps is
a technically complex process. For your
convenience, we recommend that you have
this work carried out by an authorized
F-CELL Service Center.
Replacing bulbs for front lamps
X Switch off the ignition.
X
Turn the exterior lamp switch to position
$
.
X
Open the hood (
Y
page 277).
:
Housing cover for high-beam headlamp
and parking lamp
;
Housing cover for low-beam headlamps
=
Bulb socket for turn signal lamp
=
Bulb socket for turn signal lamp
?
Bulb socket for low-beam headlamp bulb
A
Bulb socket for high-beam headlamp bulb
B
Bulb socket for parking and standing lamp
bulb
Low-beam bulb
X
Press retaining lug of housing cover
;
downward and remove cover.
X Pull electrical connector off.
X
Unclip the retainer spring on the bulb
socket
?
and take out the bulb.
X
Insert the new bulb so that its socket
locates in the recess of the lamp housing.
X
Clip on the retainer spring.
X Plug electrical connector onto the bulb.
X
Reattach housing cover
;
on the lower
side and fold it upward until it engages.
High-beam bulb
X
Press retaining lug of housing cover
:
downward and remove cover.
X Turn bulb socket
A
with the bulbs
counterclockwise and remove it.
X Pull bulb by the base (not by the glass tube)
out of bulb socket
A
.
X
Insert new bulb so that the bulb base
R
fits in the recess of the bulb socket
R
rests flush against the bulb socket
Replacing bulbs
343
Practical hints
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 343
Z