Mercedes-Benz B-Class F-CELL, Руководство оператора

Страница: 181 / 368

For example, if you are listening to the radio
while the navigation application is active on
the display, you can operate both
applications using voice control.
To operate a different function using voice
control, you must first switch to that
application using the corresponding
command.
Operating Voice control
1
Cancels Voice control
2
Activates Voice control
3 X
Decreases the volume
W
Increases the volume
Starting the Dialog
X Switch on the ignition (
Y
page 214).
X
Pull the lever toward you.
An acoustic signal confirms that the dialog
has been started.
X Give a command.
Interrupting the Dialog
If a list appears on the display, you can use
the “Pause” command to interrupt the dialog.
You can then select an entry using the
COMAND control panel.
Canceling the Dialog
X
Push the lever away from you.
An acoustic signal confirms that the dialog
has been canceled.
or
X
Say the command “Cancel” (except when
creating and storing voice tags, navigation
entries or during individualization).
or
X
Press any button on COMAND.
Adjusting the Volume
X Start the dialog.
X
Give a command, e.g. “Help”.
X Press the
W
or
X
button.
The volume increases or decreases during
voice output.
or
X
Set the volume for the voice output on the
volume control for COMAND.
Display Messages
The audible help function can be
supplemented by visual help on the display
(
Y
page 84). If the help function is switched
on, the most important commands that are
currently possible appear in the display when
you start the dialog.
In the address book and navigation system, a
selection list is shown in the display if voice
control requires additional information from
you.
1
Display
COMAND Voice Control (Overview)
179
COMAND
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 179
Z