Mercedes-Benz B-Class 2011, Руководство пользователя

Страница: 139 / 329

!
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select trans-
mission position D and drive program E or
S.
Engaging park position P
X
Push the DIRECT SELECT lever in the direc-
tion of arrow P.
Transmission position display P is shown in
the multifunction display.
i
When you engage park position P, make
sure that the transmission position display
shows P in the multifunction display.
i
You can only engage park position P when
the vehicle is stationary.
i
The automatic transmission shifts into
park position P automatically if you open
the driver's door when the vehicle is sta-
tionary or when driving at very low speed
with the transmission in position D or R. In
addition, a warning tone sounds and a dis-
play message is shown.
i
If you depress the brake pedal and push
the DIRECT SELECT lever up or down, the
parking lock is disengaged and the trans-
mission shifts to neutral N.
At transmission fluid temperatures below
Ò 20 †, you can only shift out of park posi-
tion P into another transmission position
when the engine is running.
If you want to shift from park position P
directly to R or D, depress the brake and
push the DIRECT SELECT lever up or down
past the first point of resistance.
!
If the engine speed is too high, do not shift
the automatic transmission directly from
D to R, from R to D or directly to P. Other-
wise, the automatic transmission could be
damaged.
Engaging reverse gear R
!
Only shift the automatic transmission to
R when the vehicle is stationary.
i
The ECO start/stop function is not avail-
able when reverse gear is engaged.
For further information on the ECO start/
stop function, see (
Y
page 129).
X
Depress the brake pedal while the vehicle
is stationary.
X
Push the DIRECT SELECT lever up past the
first point of resistance.
Shifting to neutral N
X
Push the DIRECT SELECT lever up or down
to the first point of resistance.
Neutral N with ECO start/stop function
activated
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill when in neutral N and
the brake is still depressed.
For further information on the ECO start/stop
function, see (
Y
page 129).
Drive position D with ECO start/stop
function activated
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill when in drive position
D and the brake is still depressed.
For further information on the ECO start/stop
function, see (
Y
page 129).
Engaging drive position D
X
Depress the brake pedal while the vehicle
is stationary.
X
Push the DIRECT SELECT lever down past
the first point of resistance.
136
Automatic transmission
Driving
and
parking