Mercedes-Benz B-Class 2011, Руководство пользователя

Страница: 84 / 329

Convenience opening feature
You can ventilate the vehicle before you start
driving. To do this, the key is used to carry out
the following functions simultaneously:
R
unlock the vehicle
R
open the side windows
R
open the panorama sliding sunroof and the
roller sunblinds
i
The convenience opening feature can
only be operated using the key. The key
must be close to the driver's door handle.
X
Point the tip of the key at the driver's door
handle.
X
Press and hold the % button until the
side windows and the panorama sunroof
are in the desired position.
If the roller sunblinds of the panorama slid-
ing sunroof are closed, the roller sunblinds
are opened first.
X
Press and hold the % button again until
the panorama sliding sunroof is in the
desired position.
X
To interrupt convenience opening:
release the % button.
Convenience closing feature
G
WARNING
When using the convenience closing feature,
make sure that nobody can become trapped.
Proceed as follows if there is a risk of entrap-
ment:
R
release the & button.
R
press and hold the % button until the
side windows and the panorama sliding
sunroof open again.
When you lock the vehicle, you can simulta-
neously:
R
close the side windows
R
close the panorama sliding sunroof
On vehicles with a panorama sliding sunroof,
you can then close the roller sunblinds.
i
The key must be close to the driver's door
handle.
X
Point the tip of the key at the driver's door
handle.
X
Press and hold the & button until the
side windows and the panorama sliding
sunroof are fully closed.
X
Make sure that all the side windows and the
panorama sliding sunroof are closed.
On vehicles with a panorama sliding sunroof:
X
Press and hold the & button again until
the roller sunblinds of the panorama sliding
sunroof close.
X
To interrupt convenience closing:
release the & button.
Resetting the side windows
You must reset each side window if:
R
the side window opens again slightly after
being closed fully.
R
the side window can no longer be fully
opened or closed.
X
Close all the doors.
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed. (
Y
page 80)
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side win-
dow is completely closed (
Y
page 80).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly.
If this is not the case, repeat the steps
above again.
Side windows
81
Opening
and
closing
Z