Mercedes-Benz 602, Руководство по обслуживанию

Страница: 78 / 324

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lower back on engine mounts with engine hoist
Hex. head bolts (66, 67)
Allen bolts (1 15) . . . . .
Hex. head bolts (35, 36)
Timing case cover (28)
(item 14).
. . . . for mounting injection pump, remove, reinstall,
25 Nm (item 15).
. . . . . . . . . . . . . . . . . in timing chain housing, remove, reinstall,
25 Nm (item 16).
. . . . . . . . . . . . . . . . . in timing case cover, remove, reinstall,
25 Nm (item 17).
. . . . . . . . . . . . . . . . .
remove, install (item 17).
Caution!
When removing timing case cover pay attention
to cylinder head gasket and oil pan gasket.
Avoid damaging. Replace damaged cylinder
head gasket.
Note
Clean parting surface on timing case cover, seal
cover with sealant 001 989 95 20.
Check crankshaft radial seal in timing case
cover, remove if required, install, sleeve
601 589 03 14 00 (item 17).
After installation warm up engine and check for leakage
(item 19).
Sealant
Hvlomar
001 989 25 20
01.10