Mercedes-Benz 280 CE 1979, Руководство пользователя

Страница: 58 / 83

Wheels Tires Changing Wheels
Changing Wheels
1. Depress parking brake pedal.
2. Move selector lever to position
« p »
3. Safeguard vehicle against rolling
off by using chocks or similar.
Place chocks under both
opposite wheels (on downhill
side), on a level road on both
sides of the opposite front wheel
when changing a rear wheel.
Observe wheel bolts!
1 For light alloy rims only
2 For steel rims only
4. Insert the combination wrench
in one of the trim ring slots and
pry off the hub cap.
5. Using the combination wrench,
loosen but do not yet remove the
wheel bolts.
6. Clean jack supporting tube, if
necessary. (Jack tubes are be­
hind the front wheel housings
and in front of the rear wheel
housings.)
7. Insert jack arm into the tube hole
up to the stop. Position the
jack so that it will always be
vertical as seen from the side,
even on inclines. Jack up the
vehicle until the wheel is clear
of the ground.
8. Then back out the wheel bolts.
Protect bolt threads from dirt
and sand. Remove the wheel.
9. Adjust the jack to allow the
wheel to be slipped on without
being lifted.
10. Slip on wheel (valve down) and
press onto the hub plate. Screw
in wheel bolts but use only such
bolts that suit the particular
rim.
i
57