Mercedes-Benz 280 CE 1979, Руководство пользователя

Страница: 39 / 83

Starting and Turning off the Engine
Engage parking brake or service
brake before starting the engine.
Place the gear selector lever in
either “ N” or “ P” position before
starting the engine.
Turn key in steering lock to position
“ 2” . The charge indicator light must
come on.
Cold Engine
Turn key in steering lock clockwise
to the stop. If necessary, depress
the accelerator slowly after the
engine has started firing.
Release key only when the engine
is running smoothly.
Hot Engine
Turn key in steering lock clockwise
to the stop. Do not actuate
accelerator. If the engine has not
fired after approx. 4 seconds,
depress accelerator to the floor
and continue cranking until the
engine runs smoothly. Release key
and back off accelerator after the
engine has started.
Cold Start at Normal Ambient
Temperatures
(about 59° F—95° F / 15° C -3 5 ° C)
Turn the key in steering lock
clockwise to the stop. Start without
actuating accelerator.
Release key only when the engine
is running smoothly.
Turning off
Turn the key in the steering lock to
position “ 0” and only remove the
key when the vehicle is at standstill.
If the coolant temperature is very
high (e. g. after hard driving on
mountain roads), do not shut off the
engine immediately but allow it to
run on for 1—2 minutes at increased
idle speed.
Hints
Observe the oil pressure gauge
immediately after starting the
engine. In a very cold engine the
oil pressure will only rise slowly,
some time after the engine has
started. Do not rev up the engine
before pressure is registered on
the pressure gauge.
The charge indicator light must go
out as soon as the engine has
started.
Do not engage the starter continu­
ously for more than 20 seconds.
At ambient temperatures of less
than —4° F ( —20° C), depress the
accelerator three times prior to
starting.