Mercedes-Benz 280 CE 1979, Руководство пользователя

Страница: 59 / 83

Wheels Tires Changing Wheels
11. Lower car and remove jack.
Tighten the five bolts evenly by
going around the wheel and
tightening every other bolt until
all the bolts are tight. Observe
a tightening torque of 72 ft. lbs.
(10 mkp).
12. To install the hub cap, slip the
tire valve through one of the
slots appr. in the middle
between two hub cap mounting
clips and press the hub cap
against the wheel flange at this
point. Then push the two
opposite clips against the rim
and seat the hub cap by firmly
striking it towards the valve
with the flat oft the hand.
13. Correct tire pressure.
Tire Pressure
A table (see fuel filler flap or last
page) lists the tire inflation pres­
sures specified for summer and
winter tires as well as for the vary­
ing operating conditions.
Tire temperature and pressure
increase with the vehicle speed.
Tire pressure should therefore only
be corrected on cold tires. Correct
tire pressure in hot tires only if
pressure has dropped below the
data listed in the table and the
respective operating conditions are
taken into consideration.