Mercedes-Benz 280 CE 1979, Руководство пользователя

Страница: 63 / 83

Electrical System
>
Replacing Bulbs
To remove, push the bulb in and
turn to the left, then lift the bulb out.
To install, grip the bulb with a
paper tissue or similar cloth, align
the pins on the base of the bulb
with the grooves in the bulb socket,
push in lightly and turn to the right
until the stop is felt.
Install only bulbs of prescribed
wattage. Refer to “ Technical Data
and last page” .
Headlight Aiming
Correct headlight aiming is of para­
mount importance to the road­
worthiness of the car. Check and
readjust headlights at regular inter­
vals and invariably when a lamp
has been replaced.
Front Lights
(Sealed Beam Version — USA
Specifications, Fog Light)
1 Cover. Remove cover (1) after
backing out knurled plastic
nuts (5) located behind head­
lights.
2 Sealed-beam unit for high and
low beam
3 Fog light
4 Turn signal, clearance (stand­
ing) and side marker light
5
6
7
8
9
10
Securing nuts for cover
Securing nuts for turn signal,
clearance (standing) and side
marker light
Vertical aiming screw,
sealed-beam unit
Horizontal aiming screw,
sealed-beam unit
Vertical aiming screw,
fog light
Horizontal aiming screw,
fog light
62