Exclusive Parking Assist
104
Driving assistance systems
Introduction of the New E-Class, Model Series 212 Sedan
b
Parking
If the driver stops and engages reverse gear after
driving past a suitable parking space, the following
message is first displayed on the multifunction display
of the instrument cluster:
"Watch for traffic! Press OK to confirm"
The parking assistance begins after the warning
displayed in the instrument cluster has been
confirmed with the OK button on the multifunction
steering wheel.
The multifunction display changes to the parking guid-
ance display and, depending on the distance to the
parking space, shows the message:
"Reverse"
This is indicated by a white arrow pointing to the rear.
Reverse the vehicle until a signal tone is heard. Then
stop the vehicle. This is the stop position. The white
arrow in the display is full. The following message
appears:
"Steer right" or "Steer left"
With the vehicle stationary, turn the steering wheel in
the direction indicated until the white arrow is full.
Maintain the steering angle and reverse the vehicle
carefully.
Stop as soon as you hear the signal tone. The vehicle
has reached the countersteering position.
The following message appears:
"Steer left" or "Steer right"
With the vehicle stationary, turn the steering wheel in
the direction indicated until the white arrow is full.
Maintain the steering angle and reverse the vehicle
carefully.
Stop as soon as you hear the signal tone.
The car must be stopped at the latest when the contin-
uous warning tone of the PARKTRONIC system
sounds. The following message appears:
"Parking guidance complete"
A signal tone sounds.
The system may ask the driver to change direction. In
this case, further displays in the multifunction display
guide the car into the final position.
If necessary, adjust the end position by maneuvering
while watching the PARKTRONIC warning indicator.
i
Note
If an obstacle in the trajectory (measurement
method) is detected during the parking procedure,
a warning message appears in the instrument
cluster and an additional warning tone is emitted.
The warning stops if the obstacle is removed or if
the vehicle drives over the position of the
obstacle.
P54.32-7434-00
Representation in multifunction display (example)
– This printout will not be recorded by the update service. Status: 01 / 2009 –