Mercedes-Benz 2016 GL, Руководство оператора

Страница: 90 / 462

Problem
Possible causes/consequences and M Solutions
The engine cannot be
started using the
SmartKey.
The on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating or interior
lighting, and try to start the engine again.
If this does not work:
X
Check the starter battery and charge it if necessary
(
Y
page 394).
or
X
Jump-start the vehicle (
Y
page 395).
or
X
Consult a qualified specialist workshop.
The engine cannot be
started using KEYLESS-
GO. The SmartKey is in
the vehicle.
A door is open. Therefore, the SmartKey cannot be detected as
easily.
X
Close the door and try to start the vehicle again.
There is interference from a powerful source of radio waves.
X
Start your vehicle with the SmartKey in the ignition lock.
Problem Possible causes/consequences and M Solutions
You cannot lock or
unlock the vehicle
using the SmartKey.
The SmartKey battery is discharged or nearly discharged.
X
Vehicles without KEYLESS-GO or KEYLESS-GO start func-
tion: try again to lock/unlock the vehicle using the remote con-
trol function of the SmartKey. Point the tip of the SmartKey at
the driver's door handle from close range and press the % or
& button.
If this does not work:
X
Check the SmartKey battery and replace it if necessary
(
Y
page 85).
X
Unlock (
Y
page 92) or lock (
Y
page 92) the vehicle using the
mechanical key.
The SmartKey is faulty.
X
Unlock (
Y
page 92) or lock (
Y
page 92) the vehicle using the
mechanical key.
X
Have the SmartKey checked at a qualified specialist workshop.
You can no longer lock
or unlock the vehicle
using KEYLESS-GO.
KEYLESS-GO was deactivated.
X
Reactivate KEYLESS-GO (
Y
page 83).
88
SmartKey
Opening
and
closing