Mercedes-Benz 2010 E 350 4MATIC, Руководство оператора

Страница: 274 / 372

Storing the spare wheel after use
If you wish to store the spare wheel after use,
carry out the following steps. Otherwise, the
spare wheel may not fit into the spare wheel
well.
! Make sure the spare wheel is dry before
storing it.
X
Unscrew the valve cap from the valve of the
collapsible tire.
X
Unscrew the valve insert from the valve
using the valve extractor integrated in the
valve cap.
X
Allow the air to escape.
i It may take a few minutes for the
collapsible tire to deflate completely.
X
Screw the valve insert back into the valve.
X
Screw the valve cap back onto the valve.
X
Take the protective wrap from the vehicle
tool kit (
Y
page 268).
X
Pull the protective wrap over the spare
wheel.
X
Place the spare wheel into the spare wheel
well.
Vehicle status messages in the
multifunction display
Notes
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot be
cleared from the multifunction display using
a
or
%
on the multifunction steering
wheel (
Y
page 126).
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
a
or
%
. They are then stored in the
vehicle status message memory
(
Y
page 139). Remember that clearing a
message will only make the message
disappear. Clearing a message will not
correct the condition that caused the
message to appear.
G
Warning!
All categories of messages contain important
information which should be taken note of
and, where a malfunction is indicated,
addressed as soon as possible at an
authorized Mercedes-Benz Center.
Failure to repair the condition noted may
cause damage not covered by the Mercedes-
Benz Limited Warranty, or result in property
damage or personal injury.
G
Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as
R
speed
R
outside temperature
R
warning/indicator lamps
R
malfunction/warning messages
R
failure of any systems
Driving characteristics may be impaired.
If you must continue to drive, do so with added
caution. Contact an authorized Mercedes-
Benz Center as soon as possible.
Read and observe the notes on the HOLD
function (
Y
page 161) and parking
(
Y
page 113) when you park the vehicle.
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may appear.
272
Vehicle status messages in the multifunction display
Practical hints
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 272