Mercedes-Benz 2010 E 350 4MATIC, Руководство оператора

Страница: 162 / 372

R
the vehicle is standing still and the brake
pedal is depressed (left foot)
R
the automatic transmission is in drive
position
D
Activating RACE START
X
Depress the brake pedal with your left foot
and keep it depressed.
X
Turn the program mode selector dial
clockwise (
Y
page 121) until the RS lamp
on the dial comes on.
The message
RACE START Confirm:
Paddle UP Cancel: Paddle DOWN
appears in the multifunction display.
i When the activation conditions are not
fulfilled anymore, RACE START is canceled.
The message
RACE START Canceled
appears in the multifunction display.
X
To cancel: Pull left steering wheel gearshift
control (
Y
page 122).
or
X
To confirm: Pull right steering wheel
gearshift control (
Y
page 122).
The message
RACE START Available
Depress gas pedal.
appears in the
multifunction display.
i If you do not depress the accelerator
pedal within 2 seconds, RACE START is
canceled. The message
RACE START Not
Possible See Operator’s Manual
appears in the multifunction display.
X
Depress the accelerator pedal fully.
The engine speed rises to approximately
4000 rpm.
The message
RACE START Release
brake to start
appears in the
multifunction display.
i If you do not release the brake pedal
within 7 seconds, RACE START is canceled.
The message RACE START Canceled
appears in the multifunction display.
X
Take your foot off the brake pedal while
keeping the accelerator pedal depressed.
The vehicle pulls away at maximum
acceleration.
The message
RACE START Active appears
in the multifunction display.
RACE START deactivates at a vehicle speed
of approximately 30 mph
(Canada: 50 km/h). The automatic
transmission switches to program mode
S+.
ESC SPORT remains switched on.
RACE START is canceled immediately if you
release the accelerator pedal while RACE
START is active or when the activation
conditions are not fulfilled anymore. The
message
RACE START Not Possible See
Operator’s Manual
appears in the
multifunction display.
i If RACE START is used repeatedly in a
short period of time, it is only available
again after having driven the vehicle a
certain distance.
Hill-start assist system
On uphill grades, the hill-start assist system
maintains the pressure in the brake system
for approximately 1 second after you have
released the brake pedal. Therefore, you can
start off smoothly without the vehicle moving
immediately after releasing the brake pedal.
G
Warning!
The hill-start assist system is not designed to
function as a parking brake. It does not
prevent the vehicle from moving when parked
on an incline.
Always engage the parking brake in addition
to shifting the automatic transmission into
park position
P.
X
Depress the brake pedal.
X
Shift the automatic transmission into drive
position
D or reverse gear R.
160
Driving systems
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 160