Mercedes-Benz 2007 C 230, Руководство оператора

Страница: 112 / 441

111
Controls in detail
Lighting
Daytime running lamp mode
왘
Turn the exterior lamp switch to
position
M
or
U
.
When the engine is running, the low
beam headlamps are switched on.
In low ambient light conditions, the
following lamps will switch on
additionally:
앫
Tail and parking lamps
앫
License plate lamps
앫
Side marker lamps
Canada only:
The daytime running lamp mode is
mandatory and therefore in a constant
mode.
Vehicles with automatic transmission*:
When the engine is running, and you shift
from a driving position to position N or P,
the low beam headlamps will switch off
with a three-minute delay.
When the engine is running, and you
앫
turn the exterior lamp switch to
position
C
, the parking lamps and
the side marker lamps switch on
additionally.
앫
turn the exterior lamp switch to
position
B
, the manual headlamp
mode has priority over the daytime
running lamp mode.
The corresponding exterior lamps
switch on (
컄
page 109).
USA only:
By default, the daytime running lamp mode
is deactivated. Activate the daytime
running lamp mode using the control
system, see “Setting daytime running lamp
mode (USA only)” (
컄
page 139).
When the engine is running, and you turn
the exterior lamp switch to position
C
or
B
, the manual headlamp mode has
priority over the daytime running lamp
mode.
The corresponding exterior lamps switch
on (
컄
page 109).
i
With the daytime running lamp mode
activated and the engine running, you cannot
switch off the low beam headlamps manually.
i
With the exterior lamp switch in
position
M
or
U
, you cannot switch on the
high beam headlamps.
The high beam flasher is available at all times.
For nighttime driving turn the exterior lamp
switch to position
B
to permit activation of
the high beam headlamps.
i
With the daytime running lamp mode
activated and the exterior lamp switch in
position
M
, you cannot switch on the high
beam headlamps.
The high beam flasher is available at all times.
For nighttime driving turn the exterior lamp
switch to position
B
or
U
to permit
activation of the high beam headlamps.