Mercedes-Benz 2007 C 230, Руководство оператора

Страница: 215 / 441

214
Controls in detail
Audio system
TDMA or CDMA network phones
Using your Mercedes-Benz specified
mobile telephone*, a number of functions
and operating steps can be performed and
displayed in the audio system display.
Further operating instructions not covered
here can be found in the operating instruc-
tions for the multifunction steering wheel
and the mobile telephone*.
If your audio system is set up for telephone
operation, the
t
symbol will appear in
the display.
When you insert your Mercedes-Benz
specified mobile telephone* into the
telephone cradle, you will be prompted to
enter your PIN for 30 seconds
(
컄
page 209). This display disappears
when you press any button.
When your mobile telephone is inserted
into the telephone cradle, you will see the
reception strength in the upper right-hand
corner of the display.
Switching on the telephone
Switching on the telephone
왘
Press
h
button.
If you have programmed an unlock
code for the telephone, you must now
enter the code.
왘
Enter code using buttons
1
to
R
.
왘
If necessary, correct number entered
with the
CLR soft key. Press soft key
briefly to delete the last digit entered;
press soft key and hold to delete the
complete number.
왘
Press
OK
soft key after entering correct
code.
The telephone is unlocked. If you have
entered an incorrect code, you must
enter the correct code.
Switching off the telephone
왘
Press
h
button for approx.
3 seconds.
PROCESSING
appears in the display until
the telephone is off. Afterward,
PHONE OFF appears in the display.
Adjusting the volume
왘
Turn rotary control of
N
button
during a telephone call.
The volume will increase or decrease
depending on the direction turned.
i
The volume can be adjusted separately for
telephone mode and audio mode.