Mercedes-Benz 2007 C 230, Руководство оператора

Страница: 323 / 441

322
Practical hints
What to do if …
Lamps in instrument cluster General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the bulb self-check when switching on the
ignition, have the respective bulb checked
and replaced if necessary.
Problem Possible cause/consequence Suggested solution
-
The yellow ABS indicator lamp
comes on while the engine is
running. The ABS has detected a malfunction and
has switched off. The BAS and the ESP
®
are also switched off (see messages in the
multifunction display).
The brake system is still functioning nor-
mally but without the systems specified
above.
If the ABS control unit is malfunctioning,
other systems such as the navigation
system* or the automatic transmission
may also be malfunctioning.
왘
Continue driving with added caution.
Wheels may lock during hard braking,
reducing steering capability.
왘
Read and observe messages in the
multifunction display (
컄
page 333).
왘
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
Failure to follow these instructions
increases the risk of an accident.
The charging voltage has fallen below
10 volts. The ABS has switched off.
The battery might not be charged suffi-
ciently.
왘
Switch off electrical consumers that are
currently not needed, e.g. seat heating*.
왘
If necessary, have the generator and bat-
tery checked.
When the voltage is above this value again,
the ABS is operational again.