Mercedes-Benz 2002 ML 500, Руководство оператора

Страница: 110 / 539

109
Controls in detail
Locking and unlocking
Restoring to factory setting
왘
Press and hold buttons
Œ
and
‹
simultaneously for about six seconds
until battery check lamp
5
flashes
twice.
Checking the batteries
왘
Press button
‹
or
Œ
.
Battery check lamp 5 comes on
briefly to indicate that the SmartKey
batteries are in order.
Unlocking and opening the tailgate
(Vehicles with tailgate opening/closing
system*)
You can unlock and open the tailgate sep-
arately.
A minimum height clearance of 7 ft
(2.15 m) is required to open the tailgate.
왘
Press and hold button
Š
on the
SmartKey until the tailgate unlocks and
begins to open.
!
If you cannot lock or unlock the vehicle
with the SmartKey, then either the bat-
teries in the SmartKey are discharged,
the SmartKey is malfunctioning or the
vehicle battery is drained.
앫
Check the batteries in the
SmartKey and replace them if
necessary (
컄
page 440).
앫
Use the mechanical key to unlock
the driver’s door (
컄 page 436).
앫
Use the mechanical key to lock the
driver’s door (
컄
page 436).
앫
Have the vehicle battery and the
battery connections checked.
If the SmartKey is malfunctioning, con-
tact an authorized Mercedes-Benz
Light Truck Center.
i
If battery check lamp
5
does not
come on briefly during check, then the
SmartKey batteries are discharged.
Replace the batteries ( 컄 page 440).
You can obtain the required batteries
at any authorized Mercedes-Benz Light
Truck Center.
i
If the batteries are checked within
signal range of the vehicle, pressing the
button
‹
or
Œ
will lock or un-
lock the vehicle accordingly.
!
The tailgate swings open upwards auto-
matically. Always make sure there is
sufficient overhead clearance.
To stop the opening procedure, press
button
Š
on the SmartKey. The tail-
gate stops moving.
i
If the vehicle was previously centrally
locked, the tailgate will lock automati-
cally when closed. The turn signals will
flash three times to confirm locking.