328
Operation
Engine compartment
Checking engine oil level with the
control system (ML 500 only)
When checking the oil level
앫
the vehicle must be parked on level
ground
앫
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least five minutes with
the engine turned off
앫
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the
multifunction display, do the following:
왘
Switch on the ignition (
컄
page 34).
The standard display (
컄
page 156)
should appear in the multifunction
display.
왘
Press button
k
or
j
on the
steering wheel until the following
message is seen in the multifunction
display:
One of the following messages will
subsequently appear in the
multifunction display:
앫
Engine oil level ok
앫
Add 1.0 qt. to reach max. oil
level
(Canada:
1.0 liter
)
앫
Add 1.5 qts. to reach max. oil
level
(Canada:
1.5 liters
)
앫
Add 2.0 qts. to reach max. oil
level
(Canada:
2.0 liters
)
왘
If necessary, add engine oil.
For adding engine oil see (
컄
page 495).
For more information on engine oil, see the
“Technical data” section (
컄
page 493) and
(
컄
page 495).
i
If you want to interrupt the checking
procedure, press the
k
or
j
button on the multifunction steering
wheel.
Содержание 2002 ML 500
