CARE AND MAINTENANCE
12
Rev 2.0
Mercator Pty Ltd. All Rights Reserved.
1.
Make sure electricity is turned off at the mains power box before commencing work. Turn-off
the power by removing fuse or turning off circuit breaker before installing the appliance.
2.
Allow the appliance to cool completely before commencing work.
CARE
1.
To prolong the useful life of this product, avoid using heat lamp alone for longer than 10
minutes. Using the fan function along with heat lamp helps cooling the product.
CLEANING & MAINTENANCE
1.
After power is turned off and the appliance is cool, wipe the outer surface with a clean cloth
dampened with petroleum-free detergent or liquid glass cleaner.
2.
Do not use alcohol cleaner, or thinner or liquid that is corrosive to plastic for cleaning.
3.
Dry the product completely before re-use.
HOW TO REPLACE HEAT LAMP
The heat lamp requires replacement when operation lifetime is reached.
1.
The following heat lamp is recommended for replacement.
MERCATOR model no. XBH1514: 800W, R7
1.
Ensure heat lamp has cooled down for at least 15
minutes. Remove fascia and disconnect lamp wire.
2.
To remove heat lamp, hold on to two ends of
linear heat lamp using a piece of clean cloth. Push
the lamp slightly towards one of the lamp holders
and take it down. Avoid touching heat lamp with
hand as grease from skin shorten life span of lamp.
Reverse the steps outlined to re-install heat lamp
