Mercado Medic REAL 9000 PLUS Series, Инструкция по эксплуатации

Страница: 14 / 60

5. Configurations and settings
This section is primarily aimed at you as a
prescriber of the device. It describes the
device's models, options when configuring
the device, and information about setting
and adjusting the device's functions. For
dimensions and performance, see 7.
Technical information.
The device is available in several configurable
models. The basic design of each model
is described below, see 5.2. Basic design.
In addition to the basic design, there are
a large number of options to personalise
the device. For available options, see the
description for each function in this section.
The models can also be equipped as
positioning chairs with, for example, torso
support, side support and neck support, and
further adapted both inside and outside the
CE marking, see 5.15. Individual adaptation.
For information about accessories and
current combination agreements please
visit our website www.mercado.se . For an
overview of accessories, read the document
'Accessories'.
The device is compatible with two seating
systems, ErgoMedic and ErgoMedic Plus. The
seating systems include seats, backrests
and armrests. The padded parts can be
combined as needed for support, relief
and stability when sitting. For users with
pain problems, the Slow Recovery variant
is available for both seating systems. This
variant contains a pressure-relieving foam
that is activated by body heat. For specific
needs, a seat mat with anti-slip material can
be fitted for using third-party seat cushions,
see 5.15. Individual adaptation. For more
information about the seating systems
and other padded parts, please visit our
website www.mercado.se . For an overview
of available upholstered details, read the
document 'Seat systems'.
On www.mercado.se there are various forms
of prescription support such as information
sheets, order forms and a digital chair
configurator. There are also instructions for
use and device information for all Mercado
Medic devices.
5.1. Required level of competence for
setting and adjusting
The functions and accessories for positioning
and relief sitting should only be set by the
prescriber of the device unless otherwise
agreed, as this requires knowledge of
good sitting positions. These features and
accessories include neck support, trunk
support, side support, Coxit mechanism, leg
support and width adjustment of armrests.
Daily functions, such as adjusting the seat
height, seat tilt, brake, gas spring-controlled
back recliner and armrest height can be
adjusted by the user themselves where
appropriate and if this can be done safely.
14
Instructions for use for medical work chairs in the REAL 9000 PLUS device range Configurations and settings
21-08742-EN-01