Mercado Medic REAL 8000 PLUS, Инструкция по эксплуатации

Страница: 25 / 48

5.13. Leg support
Manual leg rests (optional) are available in the centre-mounted version. The centre-mounted
leg support has a full footplate and is adjustable in height, leg support angle t and footplate
angle. The angle of the leg support can be adjusted to four different positions. The device
can be equipped with an optional adapter to be combined with Cross leg support from ETAC
(external supplier). Cross leg supports are removable without tools, follow the seat when
adjusting height and can be rotated sideways to facilitate entering and exiting. The leg support
is available in three models, Standard fixed angle, Tight fixed angle where the angle of the knee
becomes closer to 90° and Angular. All models are adjustable in height and angle of footplate
and are available with foot plates of different widths.
Centre-mounted
The centre-mounted leg support is adjustable in height
(A), angle of leg support (B) and angle of foot plate(C),
see Figure 5.25.
Setting the height of the footplate:
1. Loosen the wheel and pull or push the footplate to the
desired height.
2. Tighten the knob.
Setting the angle of the leg support:
1. Unscrew the screw with a 5 mm Allen key and set
the desired angle.
2. Tighten the screw.
Setting the angle of the footplate:
1. Adjust the screw with 5 mm Allen key. Screw
clockwise to angle the footplate down. Screw
anti-clockwise to angle the footplate up.
Figure 5.25. Centre-mounted leg support.
Cross leg support adapter
The Cross leg support, see Figure 5.26, is mounted on
the armrest width adjustment U-bar. The adapter can be
mounted in two depth positions for different deep seats
and be fine-tuned steplessly to 50 mm in depth. For more
information, see the installation instructions "Adapter
leg support, Cross" available at the www.mercado.se/en/
mercado-document .
Figure 5.26. Cross leg support adapter.
A
B
C
25
Instructions for use for REAL 8000 PLUS Ophthalmology medical clinic chairs Configurations and settings
21-08997-EN-00