Menzer LHS 225 PRO, Перевод оригинальной инструкции по эксплуатации

Страница: 46 / 112

6 EN
ENGLISH
• Do not pull the power cable over sharp edges to
prevent wrinkles and cracks that may lead to more
damage because of it.
• Never unplug the machine from the wall socket
by pulling on the cable, but grip it by the plug. Also
never hang the machine by the cable.
• Do not expose any part of the machine to ag-
gressive media such as chemicals or excessive
heat above 60 °C.
• Never make any technical modifications to the
machine.
• Only use abrasives and driving discs recom-
mended by MENZER that match the application
and machine dimensions and that exactly fit the
grinding spindle to prevent runout, vibration and
loss of control of the machine.
• The use of damaged insertable tools is prohib-
ited. Before every use, as well when having been
dropped on the floor and in case of other external
influences, insertable tools and driving discs must
be checked for damage and replaced if neces-
sary.
• Do not use a tool if its permissible speed is not
equal or higher than the maximum speed speci-
fied on the power tool.
• Use the long-neck sander only to work on dry
surfaces. Do not use water or other liquid cooling
lubricants as these can cause a fatal electric
shock.
• To prevent cuts or serious injury, do not run the
machine close to your body or directly on your
body. The power tool may only be carried on the
body when it is completely shut down.
• Only put the machine down after it has been
switched off and the driving disc has stopped
completely to avoid catching and kickbacks.
• Regularly clean the ventilation slots on the ma-
chine to maintain the cooling effect and to prevent
deposits due to electrically conductive dust, as
these can contribute the risk of electric shock and
short circuits.
• Disconnect the machine immediately from the
mains during breaks or at the end of work.
• Turn the power off immediately if unusual noises
are heard or unusual vibrations occur, and contact
our MENZER service.