Engineers Programming
ENTER ENGINEER CODE AND THE [CALL ENGR] LED WILL
ILLUMINATE TOGETHER WITH THAT OF THE ZONE WHICH
CREATED THE LAST ALARM. IF THE [CALL ENGR] LED
FLASHES, THE LAST ALARM OCCURRED WITH A LINE FAULT
PRESENT. OPTION DEFAULTS ARE SHOWN IN BOLD.
To program any of the zones (1 to 5) as standard
NIGHT circuits, simply ensure that they are not
programmed as Last Exit, Access or Fire.
To program any of the zones (1 to 5) as LAST EXIT
circuits, press [1]. If any of the Zone LED’s are ON, then
these are already programmed with this option. To
change zones simply enter the zone number, which
will toggle the zone LED on/off. Once the setting is
correct press [0] (END) and listen for the confirmation
tone.
LED
1
2
3
4
5
LAST EXIT
ON
/OFF ON/OFF ON/OFF ON/OFF ON/OFF
DEFAULT = ZONE 1 ONLY
To program any of the zones (1 to 5) as ACCESS
circuits, press [2] , If any of the Zone LED’s are ON, then
these are already programmed with this option. To
change zones simply enter the zone number, which
will toggle the zone LED on/off. Once the setting is
correct press [0] (END) and listen for the confirmation
tone.
LED
1
2
3
4
5
ACCESS: ON/OFF
ON
/OFF ON/OFF ON/OFF ON/OFF
DEFAULT = ZONE 2 ONLY
To program any of the zones (1 to 5) as FIRE circuits,
press [3]. If any of the Zone LED’s are ON, then these
are already programmed with this option. To change
zones simply enter the zone number, which will toggle
the zone LED on/off. Once the setting is correct press
[O] (END) and listen for the confirmation tone
LED
1
2
3
4
5
ON FOR: ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF
NO DEFAULT ZONES
EXIT TIME: Press [4] and 3 zone LED’s will light, indicating
that a 3 digit exit time (in secs) is required, Once
complete the confirmation tone will be heard. e.g. for
30 secs. enter 030
EXIT TIME
S
DEFAULT = 030 SECS
ENTRY TIME: Press [5] and 3 zone LED’s will light,
indicating that a 3 digit entry time (in secs) is required,
Once complete the confirmation tone will be heard
e.g. for 30 secs. enter 030
ENTRY TIME
S
DEFAULT = 030 SECS
BELL DURATION:
Press [6] [1] and 3 zone LED’s will light,
indicating that a 3 digit bell duration time (in
mins) is required. Once complete, the
confirmation tone will be heard. e.g. for 20
mins, enter 020.
BELL DUR.
m
DEFAULT = 020 MINS
BELL DELAY:
Press [6] [2] and 3 zone LED’s will light,
indicating that a 3 digit bell delay time (in
mins) is required. Once complete the
confirmation tone will be heard. e.g. for 5
mins, enter 005
BELL DELAY
m
DEFAULT = 000 MINS
OPTIONS: 63 - 69 Not applicable to TS500
SIGNALLING OPTIONS:
Press [6] [3] and combination of zone LED’s will
light, each showing a different setup:
LED
1
2
3
4
5
ON
OFF
BELL IS
SAB
NO
ALARM
ABORT
AUDIBLE
PA
PA
AUDIBLE
ON L.F
NOT
USED
BELL IS
SCB
ALARM
ABORT
SILENT
PA
PA
SILENT
ON LF
NOT
USED
SIGNALLING OF FIRE:
Press [6] [4] and combination of zone LEDs will
light, each showing a setup:
LED
1
2
3
4
5
ON = FIRE
SIGNALLED
IN:
UNSET PARTSET
A
PARTSET
B
FULL SET
NOT
USED
ON/OFF ON/OFF ON/OFF ON/OFF NOT
USED
496525 Issue A
7 of 10
TS510 & TS500
TS510 & TS500
