2
CONGRATULATIONS!
You are the owner of a world-class heat producing gas fireplace insert.
This elegant, highly efficient insert will be a constant source of comfort and fascination. It will be the
focal point of beauty and interest in your home.
The Mendota Gas Fireplace Insert is a true heating appliance incorporating the traditional aesthetics of
fireplace fire viewing with the controllability and fuel efficiency of a home gas furnace. Of particular
interest is the low fuel consumption and brilliant fire viewing afforded by the patented realistic
HearthGlo wood fire-like combustion system.
Carefully read the following instructions prior to actual installation. Proper Mendota Gas Fireplace
Insert installation and operation will give you years of safe trouble free comfort and enjoyment.
If you have any questions regarding installation or operation of your Mendota Fireplace Insert please
contact your local dealer.
.
..CAUTION...
FOR YOUR SAFETY do not install or operate your Mendota Gas Fireplace Insert without first reading and understanding
this manual. Any installation or operational deviation from the following voids the Mendota Gas Fireplace Insert Warranty
and may prove hazardous:
Due to high temperatures, the Fireplace in which the Insert is to be installed should be located out of traffic and away from
furniture and draperies. Children and adults should be alerted to the hazards of high surface temperature and should stay
away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as
the Mendota Gas Fireplace Insert.
Clothing or other flammable material should not be placed on or near the Insert.
Mendota Inserts are designed for installation only in vented non-combustible fireplaces. Any fireplace in which an Insert is
to be installed MUST be vented to the outside in accordance with the latest addition of Natural Fuel Gas Code. Do not
connect this appliance to a chimney flue serving a separate solid fuel-burning appliance. Any grill, panel or glass removed
for servicing the Insert MUST be replaced prior to operating the Insert.
The Mendota Gas Insert is a powerful, efficient heating unit. It has been designed as a major source of supplemental heat. It
should not take the place of, or be used as, a whole house heating system.
Installation and repair should be done by a qualified service person. The Insert should be inspected before use and at least
annually by a professional Mendota approved service person. More frequent cleaning may be required due to excessive lint
from carpeting, bedding material, etc. It is imperative that control compartments, burners and air passageways be kept clean.
DO NOT use this insert if any part has been under water or exposed to moisture corrosion. Immediately call a qualified
service technician to inspect the Fireplace Insert and replace any part of the control system and any gas control that has been
under water. DO NOT use this insert if burner does not light immediately. If burner does not light promptly, turn off unit
and call your Mendota dealer.
It is Johnson Gas Appliance Company's policy that no responsibility is assumed by the Company or by any of its employees
or representatives for any damages caused by an inoperable, inadequate, or unsafe condition that is the result, either directly
or indirectly, or any improper operation or installation procedures.
INSTALLER: THESE INSTRUCTIONS ARE TO REMAIN WITH HOMEOWNER.
f i r e - p a r t s . c o m
Содержание SEABROOK D-40
