Mendota DXV-60, Инструкция по установке и эксплуатации

Страница: 77 / 86

85-03-01115 DXV35 TIMBERFIRE Page 77
6.7 REPLACEMENT PARTS INFORMATION
How to Access Components
The descriptions below show where the main fireplaces components are located and how to access them for service. The
descriptions show how to access the components after the fireplace has been installed. All components are also accessible from
the outside of the unit before the fireplace is installed.
Pilot : The pilot light is located on the right side the firebox to the right ends of the burners.
Gas Valve : The main gas valve is located behind the lower grill and beneath the firebox.
Complete Valve Assembly : To make working on components easier, this fireplace has been designed with the valve, pilot,
shutter boxes, shutter cables and gas lines as part of one assembly that can be removed from the fireplace. To remove the
assembly, first remove burners and burner airbox. After disconnecting the gas line and wires, below the firebox, remove hex nuts
that secure the valve mounting plate to firebox floor. Lift up and remove the entire assembly from the firebox.
Convection Blowers : The convection blower s are mounted on the firebox’s rear wall. To access the convection blowers, remove
the Valve Assembly first.
General Replacement Parts List
PART NO DESCRIPTION PART NO DESCRIPTION
65-02-00103
TADPOLE GLASS GASKET (106”)
05-04-00035 PILOT ASS'Y. NAT.GAS
65-06-00463 GLASS
– FLAT
HA-30-00237 LP KIT
HA-30-00415 DOOR FRAME ASSEMBLY
– FLAT
65-14-00030 ORIFICE (NAT. GAS) # 30
35-01-00240 COALS 12 OZ BAG 65-14-00049 FRONT ORIFICE (NAT. GAS) # 49
35-01-00239 GLOWING INSWOOL 15-02-00120 R H BLOWER WITH MOTOR
35-01-00601 FIREBRICK KIT 15-02-00121 L H BLOWER WITH MOTOR
05-02-00313 SIT VALVE NAT. GAS 65-06-00125 BLACK PAINT - 12 OZ. SPRAY CAN
HA-30-00470 PILOT ASSY. LPG 65-06-00455 KEL-KEM GLASS CLEANER/POLISH